FACE SHIELD INSTRUCTIONS
Peel the protective film from both sides of the Front Shield and Strap.
Slide the strap through the two slots on the Front Shield.
Line up the holes in the Front Shield and Strap, and secure them in place by pushing a rivet through both holes.
Repeat the previous step with the other side of the mask. The Front Shield should be bent slightly around the Strap.
Place the Face Shield over your head, wrapping the ends of the strap around your head until the mask feels comfortable and secure.
Hold the ends of the strap together with your fingers and remove the mask from your head.
Push a rivet through the aligned adjustment holes to set the length of the Strap.
Replace the Face Shield onto your head and check that it is still comfortable and secure.