Skip to content

FACE SHIELD

In response to the 2020 Coronavirus COVID-19, LW Scientific has developed a single-use face shield for the front-line medical community.

FACE SHIELD INSTRUCTIONS

Step one

Peel the protective film from both sides of the Front Shield and Strap.

STEP TWO

Slide the strap through the two slots on the Front Shield.

STEP THREE

Line up the holes in the Front Shield and Strap, and secure them in place by pushing a rivet through both holes.

STEP FOUR

Repeat the previous step with the other side of the mask. The Front Shield should be bent slightly around the Strap.

STEP FIVE

Place the Face Shield over your head, wrapping the ends of the strap around your head until the mask feels comfortable and secure.

STEP SIX

Hold the ends of the strap together with your fingers and remove the mask from your head.

STEP SEVEN

Push a rivet through the aligned adjustment holes to set the length of the Strap.

STEP EIGHT

Replace the Face Shield onto your head and check that it is still comfortable and secure.